How To Reset Samsung Dryer Hc Error Code. Turn on the dryer and restart the cycle. You will have to unplug it and clean the filters.
Check if the dryer is working after turning it on once more. This code is similar to door open but will definitely need a bit more investigation. Locate the wiring harness on the connector labeled cn4 on the board.
That's All It Takes To Reset.
If this error occurs, turn off the dryer and then touch and release each button on the. If there is something wrong with the heat supply, it is not going to be able to dry your clothes properly. Hc is heater circuit error.
Unplug Your Dryer From Its Power Source.
Samsung error hc or he the hot air compressor may be overheated. You will have to unplug it and clean the filters. If it returns the same error message et on your screen, then something in its electronic.
If The Panel Detects A Stuck Or A Continuously Pressed Button The Following Error Codes Will Appear (Be, Bc2, Be2, 6E, 6C2, 6E2).
In this video we explain in detail how to check the resistance of your washing machine. Unplug the dryer and check for loose or damaged. Shut off the dryer for 60 seconds, and then turn it back on again.
Samsung Dryer Hc Or Hc Error Code Error Code Possible Causes The Dryer Vent Is Restricted.
Use these steps to fix this problem. This code is similar to door open but will definitely need a bit more investigation. Unplug that connector and test between the red and blue.
Unplug The Dryer And Check For Loose Or Damaged Wiring Connections In The Door/Lock Switch.
Turn on the dryer and hold the signal and temperature button for 3 s until you hear 3 loud beeps. If your dryer presents any of the above error codes you will first. Unplug it for 10 minutes then plug it back in and hold down the wrinkle prevent and mixed load bell buttons at the same time for 3 seconds.