How To Clean Maytag Neptune Washer Filter. Clean in and around the door. Place a broad, flat container beneath the drain pump filter to collect the drain water.
Shows you how to clean the pump filter for a maytag frontload washing machine. Turn the handle on the front of the filter cover. Remove any clothing or items from the washer.
To Open And Clean Your Front Load Washer Drain Pump Filter:
Replace the filter into its housing and turn clockwise to lock it in place. Release the black hose from the hose clip, remove the plug, and. Depending on the particular model, the filter may be inside the removed agitator or connected to a rod in the center of the washing compartment revealed by the removed agitator.
Open The Washer Door Or Lid And Wipe Down The Inside Glass Or Metal With Affresh® Machine Cleaning Wipes Or A Damp Cloth.
Remove any clothing or items from the washer. Place both hands around the lower portion of the agitator, and carefully pull the agitator upward, straight out of the door opening, to reveal the lint filter. On front load washers, use the textured side of the wipe to clean the outside of the rubber door seal.
Turn The Handle On The Front Of The Filter Cover.
Shows you how to clean the pump filter for a maytag frontload washing machine. Remove and discard any accumulated lint and debris. With your finger, push down on tab on right side of drawer, and up on tab on left side of drawer.
Put A Towel In Front Of The Drain Pump To Collect Drips.
Clean in and around the door. Turn the knob on the front of the assembly counterclockwise and pull it out for cleaning. Also question is, does a maytag front load washer have a filter?
Pull The Bottom Away From The Washer, Slide The Panel Down And Set It Aside.