Hot Tub Start Up Bromine. Ph should be between 7.4 and 7.6, ta between 80 and 120 ppm, calcium hardness between 175 and 250 ppm, and chlorine between 1 and 3 ppm (or bromine at 3 to 5 ppm ). To do this you should be running the jets to disolve the crystals and have it go through the hole system.
Contact information will be included in your order confirmation for any questions leading up to delivery. I have been using bromine and i happened to call intex today for another issue and i asked if they recommended bromine or chlorine. Each time you drain the spa, the bromide level drops back down to zero and must be rebuilt.
This Product Contains Sodium Bromide, Which Is The Chemical Usually Added To The Tub On New Fill To Build A Bromide Bank Of ~50 Ppm.
It could be daily, every two to three days or weekly. But if chlorine sanitizer had been used, wait to switch until a water change is done. Ph should be between 7.4 and 7.6, ta between 80 and 120 ppm, calcium hardness between 175 and 250 ppm, and chlorine between 1 and 3 ppm (or bromine at 3 to 5 ppm ).
There Is No Advantage To Using Dichlor (Stabilized Chlorine) For Shocking A Bromine System But It Probably Wouldn't Hurt.
Test it with frog® test strips to get hardness, total alkalinity, and ph in the ideal ranges. Bromine levels should be 3 to 5 ppm. There are two ways of doing this.
The First Method Is A Slower Process (Takes About An Hour Or Two), But Only Requires A Garden Hose.
Check the levels in your hot tub water using bromine test strips. Weekly care once spa is filled, start your spa. Bromine tablets for hot tubs are actually a mixture of chlorine and bromides.
A Hot Tub Maintenance Routine Revolves Around The Type Of Sanitizing System.
O once the hot tub is a minimum 75 degrees, add initial dose of mursatt spa glo (50ml/1000l) It can take several weeks for enough bromine tablets to dissolve and build an effective level of bromides — your spa's bromide bank — so that bromine can be created. I have been using bromine and i happened to call intex today for another issue and i asked if they recommended bromine or chlorine.
Each Time You Drain The Spa, The Bromide Level Drops Back Down To Zero And Must Be Rebuilt.
But follow the directions on the packaging to be sure.  a common measurement is to add 2 ounces (56.7 grams) of sodium bromide per 500 gallons (1,900 l) of water. I’m just not sure what order i should do things in to get the tub balanced.