Chevy Equinox Remote Start Not Working. Within 5 seconds, insert the second working flip key into the ignition and turn to. Pulling the key out, checking.
Then press and hold the remote start button for at least four seconds on the key fob. Well, annoying because this is my first vehicle with this feature. One i seen actually stuck in the starting position and burned up the starter before power could be shut off to the vehicle.
Table of Contents
Everything Else Is Working ( Trunk And Panic.
The remote start all of a sudden stopped working. Replace the battery with a cr2032 battery or equivalent as soon as possible. Shifter to be in park and trying neutral etc.
Remote Start Will Not Work When The Check Engine Light Is On.
Press the start button for at least four seconds. To remote start this way, you will need to: The second set of keys/flop will.
Hold The Brake Pedal Then Press The “ Engine Start/Stop “.
2012 chevy equinox remote starter not working fix solution from www.youtube.com. 2018 equinox remote start kit 2 key fobs manual rear. I have a 2013 chevy equinox with factory remote start.
Changed The Battery In The Key Fob And Used The Back Up Remote.
2003 trailblazer ls 4.2l i6 rwd 182,000. 2013 equinox lt1 3.6l v6 fwd 105,000. A common issue with the later 90's chevy was an ignition tumbler going bad.
To Get Started You'll Want To Take Out The Physical Key And Then Use A Pry Tool To Snap Apart The Two Sides Of The Key Fob.
Door battery check engine light gauges. Insert the cut emergency key of the new smart key fob into the key lock cylinder and turn the key counterclockwise to the unlock position 5 times within 10 seconds. So, i have a 2012 equinox and the autostart won't work.
